材料科学
气相二氧化硅
复合材料
保温
粒径
热导率
化学工程
工程类
图层(电子)
作者
Hye Youn Jo,Su Jung Oh,Mi Na Kim,Hyung Mi Lim,Seungho Lee
标识
DOI:10.4191/kcers.2016.53.4.386
摘要
Heat insulation plates of fumed silica were prepared by mixing fumed silica, SiC powder and chopped glass fiber by a high speed mixer followed by pressing of the mixture powder in a stainless steel mold of 100 100 mm. Composition of the plates, particle size of SiC, and type of inorganic binder were varied for observation of their contribution to heat insulation of the plate. The plate was installed on the upper portion of an electric furnace the inside temperature of which was maintained at 400C and 600C, for investigation of heat transfer through the plate from inside of the electric furnace to outside atmosphere. Surface temperatures were measured in real time using a thermographic camera. The particle size of SiC was varied in the range of 1.3 ~17.5 m and the insulation was found to be most excellent when SiC of 2.2 m was incorporated. When the size of SiC was smaller or larger than 2.2 m, the heat insulation effect was decreased. Inorganic binders of alkali silicate and phosphate were tested and the phosphate was found to maintain the heat insulation property while increasing mechanical properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI