纳米晶材料
材料科学
退火(玻璃)
成核
微晶
粒度
合金
无定形固体
结晶
晶粒生长
冶金
结晶学
化学工程
纳米技术
热力学
化学
工程类
物理
作者
Qiang Song,Shu Qing Qin
标识
DOI:10.4028/www.scientific.net/msf.688.353
摘要
In the present paper, the effects of two-step annealing on the soft magnetic properties of nanocrystalline Fe73.5Cu1Nb3Si13.5B9 melt spun ribbons were studied. The two-step annealing comprises low-temperature preannealing (first step) for an α-Fe(Si) phase nucleation in an amorphous matrix, and a subsequent high-temperature annealing (second step) for the growth of precipitated crystallites. Compared with a nanocrystalline alloy obtained by conventional one-step annealing at 550 °C for 1 h, the grain size of α-Fe(Si)crystalline phase in the Fe73.5Cu1Nb3Si13.5B9 alloy decreased greatly after it is pre-annealed at 480°C for 1 h followed by annealing at 550°C for 40 min. It has been shown that the soft magnetic properties can be significantly improved by applying two-step annealing. The decrease of grain size of α-Fe(Si) crystalline phase may result from the nucleation rate increase during the crystallization of pre-annealed.
科研通智能强力驱动
Strongly Powered by AbleSci AI