催化作用
煅烧
共沉淀
费托法
乙烯
合成气
碳氢化合物
锰
初湿浸渍
化学
无机化学
材料科学
化学工程
选择性
有机化学
工程类
作者
Yu Xing,Gaopeng Jia,Zhenxin Liu,Shaoming Fang,Chenxi Zhao,Xuehui Guo,Steven L. Suib
出处
期刊:Chemcatchem
[Wiley]
日期:2019-04-30
卷期号:11 (14): 3187-3199
被引量:12
标识
DOI:10.1002/cctc.201900023
摘要
Abstract To rule out disturbances from water‐soluble efficient promoters (e. g., K2O or combination of S/Na), a simplified iron/support catalyst system was employed to investigate novel supports for the catalytic conversion of syngas (CO+H2) to light olefins (FTO). A series of supports with nominal compositions of ZnAl2O4 ⋅ xAl2O3 (x=1, 2, 3) were prepared by coprecipitation and subsequent high temperature calcination at 1200 °C for 24 h to generate partially passivated ZnAl2O4 and Al2O3 phases, through which each formed component of a catalyst may minimize interactions among them and exhibit unique activity. Iron catalysts were prepared by incipient wetness of iron salts over these supports. At a total pressure of ca. 20 bar and a CO conversion of 35 %, a catalyst with a nominal composition of 15 %Fe/85 %(ZnAl2O4 ⋅ 3Al2O3) exhibits a surprising C2=‐C4= hydrocarbon distribution of 58 %, which reaches a huge increase by almost 100 % in comparison with iron catalysts over regular supports (e. g., carbon, gamma‐Al2O3, etc.). This catalyst demonstrates the 1200 °C passivated ZnAl2O4 ⋅ 3Al2O3 as probably the most selective support material for iron‐based FTO catalysts. At CO conversion of 35 %, the contents of ethylene in C2, propylene in C3, and butylene in C4 products achieve extraordinary values of 82 %, 92 %, and 91 %, respectively.
科研通智能强力驱动
Strongly Powered by AbleSci AI