电凝
无氧运动
制浆造纸工业
化学
环境科学
环境工程
工程类
医学
物理疗法
作者
Longqian Xu,Xiaojun Xu,Guangzhu Cao,Shuli Liu,Zhengyang Duan
标识
DOI:10.5004/dwt.2018.23229
摘要
In the this work, the performance of Fe-electrocoagulation in anaerobic (ANA) and aerobic (AER) environments for simultaneous removal of Cd 2+ and Mn 2+ from synthetic wastewater were investigated. Detailed experiments were carried out to evaluate the effects of oxidants and reductants, initial pH (pH i ), current density (j), nature of the anions, and initial concentration ([anions] 0 ) on electrocoagulation performance. The results showed that ANA process was superior to AER process due to the formation of high proportion of Fe(II)/Fe(III) hydroxide species (green rust). These results were supported by X-ray photoelectron spectroscopy analysis. A high current density favored the heavy metal removal, especially in the ANA process and an R Cd of 95.21% and an R Mn of 93.83% were obtained at a current density of 100 A/m 2 . A significant difference was also observed between chloride and sulfate for the heavy metal removal; chloride was more suitable for Mn 2+ removal than sulfate but the opposite was true for Cd 2+ when the initial anion concentration was 50 mmol/L. However, excess concentrations of chloride and sulfate had an adverse influence on the Cd 2+ and Mn 2+ removal in the AER and ANA processes, although the increase in Cl -(from 10 to 50 mmol/L) and SO 4 2-(from 10 to 30 mmol/L) contributed to the removal of Cd 2+ . Finally, kinetic isotherm and thermodynamic studies were conducted to illustrate the removal mechanisms.
科研通智能强力驱动
Strongly Powered by AbleSci AI