材料科学
热导率
改装
气凝胶
保温
复合材料
热的
复合数
灰浆
涂层
热桥
耐久性
工作(物理)
热障涂层
参数统计
太阳增益
结构工程
热阻
热舒适性
相变材料
玻璃
作者
Baogang Zhang,Jiabo Song,Xinchen Pan,Weitao Wang
出处
期刊:Buildings
[Multidisciplinary Digital Publishing Institute]
日期:2026-10-28
卷期号:16 (21): 4306-4306
标识
DOI:10.3390/buildings16214306
摘要
Aiming to address the universal challenge that conventional phase-change material (PCM) walls for cold-climate rural buildings have low overall thermal resistance, causing rapid nocturnal heat loss and poor latent-heat utilization, this work develops composite specimens combining aerogel insulation coating and microencapsulated-PCM mortar for rural residences in Northern China. Experimental measurements and COMSOL Multiphysics®6.3 (COMSOL)-calibrated numerical simulations are adopted to investigate the coupled heat-transfer mechanism and multi-dimensional trade-offs among thermal regulation performance, mechanical properties and PCM cyclic-utilization efficiency. The results reveal that rising PCM dosage reduces the density and thermal conductivity of mortar; the specimen with a 30% PCM sand-replacement ratio plus 5 mm aerogel coating reaches a thermal conductivity of 0.116 W/(m·K). Owing to synergistic effects, aerogel mitigates external thermal disturbances to optimize PCM melting–solidification cycles while PCM buffers indoor temperature swings, delivering improved temperature-attenuation performance. Parametric analysis demonstrates that 30% PCM replacement and 23.0 °C phase-change temperature form a multi-objective equilibrium balancing thermal regulation, mechanical durability and PCM utilization, instead of a thermal-only optimum. Since these parameters are obtained under Dalian meteorological conditions and cannot be generalized, the proposed material–climate matching principle offers analytical references for low-carbon retrofitting of rural building envelopes in other high-latitude cold regions.
科研通智能强力驱动
Strongly Powered by AbleSci AI