材料科学
汽车工业
光电子学
工程类
电气工程
噪声抗扰度
机械工程
免疫
汽车工程
汽车电子
作者
Feng Qiu,Xiaodong Yang,Zhuang Wang,Shijie Wang,F T Liu,L Hu,Liming Liao,Qiang Zhang,Hongtao Jiang,Pengcheng Yu,Hao Gu,Shijin Ding,Chunlei Wu,D Y Zhang,Haiou Li,Hong Zhou,Jincheng Zhang,Linna Zhao,Xiaofeng Gu,Wei Huang
出处
期刊:Proceedings of the ... International Symposium on Power Semiconductor Devices & ICs
[Institute of Electrical and Electronics Engineers]
日期:2026-05-24
卷期号:: 145-148
标识
DOI:10.1109/ispsd64561.2026.11553665
摘要
This paper proposes an advanced 0.15μm 120 V P-epi BCD technology platform applied for automotive applications. The 60-120 V n/p LDMOS adopts controllable RESURF technology and deep drain profile engineering, achieving best in class breakdown voltage (BV) & specific on-resistance (Ron,sp) of 146 V/155 mOhm*mm2, and maintaining high safe operating area (SOA) performance from -40 °C to 125 °C. The deep trench isolation (DTI) is used to suppress latch-up and reduce noise coupling, which significantly reduces the injection ratio (α) of the parasitic PNP from 0.93 to 0.41 and the current gain (β) of the parasitic NPN from 47 to 3.49. On the other hand, a novel composite PNP-based ESD (CPNP-ESD) is proposed to improve the capability of the failure current (IT2), which constructs a composite current path combining lateral and vertical paths by removing the HVNW, and thereby effectively mitigates surface current crowding. The base structure is designed to tune trigger voltage (VT1) and holding voltage (Vh) by modulate PNP current gain. It achieves an IT2exceeding 3 A at 25 °C and 2.5 A at 125 °C, maintains a stable holding voltage (Vh), and significantly reduces the latch-up risk.
科研通智能强力驱动
Strongly Powered by AbleSci AI