微观结构
烧结
材料科学
晶界
热导率
陶瓷
粒度
相(物质)
声子散射
晶粒生长
复合材料
冶金
矿物学
化学
有机化学
作者
Masahide Okamoto,Hideo ARAKAWA,Masabumi OOHASHI,Satoru OGIHARA
出处
期刊:Nippon Seramikkusu Kyōkai gakujutsu rombunshi
[Ceramic Society of Japan]
日期:1989-01-01
卷期号:97 (1132): 1478-1485
被引量:39
标识
DOI:10.2109/jcersj.97.1478
摘要
The high thermal conducting mechanism of AlN ceramics has been investigated by the relationship between microstructure and thermal conductivity of the samples which were obtained by pressureless-sintering at 1900°C for 1-24h with Y2O3 2 at% addition as a sintering aid. The thermal conductivity increased gradually with increasing sintering time from 199W/m·K at 1h to 266W/m·K at 24h. Microstructure was investigated by SEM, TEM and powder X-ray diffraction together with quantitative analysis of Y and O contents. AlN grain size increased from 4μm at 1h to 12μm at 24h and the grain boundary phase gradually concentrated to triple points and the amount of this phase decreased with sintering time. Furthermore, grain boundary phase composition changed from Al2Y4O9(Al2O3⋅2Y2O3) at 1h to Y2O3 at 24h. This change seems to occur through selective reduction and nitrization of Al2O3 in Al2Y4O9 with an increase in sintering time. These results show that the decrease in phonon scattering at grain boundaries improves the thermal conductivity.
科研通智能强力驱动
Strongly Powered by AbleSci AI