Abstract The vulcanization of natural rubber (pale crepe) by tetramethylthiuram monosulfide and sulfur (1 mole monosulfide per gram-atom of sulfur) has been studied in the temperature range from 90° to 150° C. The following results were obtained : 1. During vulcanization, the concentration of the thiuram monosulfide and also of the sulfur decreases. 2. In accordance with a first-order reaction, about 66 mole-per cent of zinc dithiocarbamate is formed (calculated on the amount of thiuram monosulfide added). Thus the same relationships were found as in vulcanization with thiuram disulfides. 3. The vulcanization of rubber with thiuram monosulfide and sulfur is, therefore, nothing else than vulcanization by thiuram disulfide, whose quantitative formation precedes the actual vulcanization reaction. 4. In no stage of vulcanization could thiuram disulfide be detected with certainty in the extracts of the vulcanizates. It must be assumed, therefore, that it reacts with the rubber instantly after it is formed. 5. The velocity constants derived for the dithiocarbamate formation at the various temperatures both from the experimental results and from the graphical presentations have been given, and their temperature dependence has been discussed. At lower temperatures, the influence of the prior interaction of the monosulfide with sulfur makes its influence on the energy relationships felt. 6. It is once more emphasized that in thiuram vulcanization it cannot be a question of a vulcanization with sulfur. In this connection we take a decided stand also with regard to the results of the more recent investigations of Craig and his coworkers.