Research on Triode Based High Re-Frequency Ultrafast Electrical Pulse Generation Technology

The high-repeat frequency ultrafast electrical pulse generation technology is mainly based on ultrafast switching devices combined with ultrafast circuits to generate electrical pulses with repetition frequencies of several kilohertz and a rise-time of nanoseconds or even picoseconds. This technology is the basis for several research studies and is one of the key technologies that has received wide attention from various countries. The problems to be solved are high re-frequency ultrafast high-voltage pulse generation and ultra-broadband ultrafast pulse transport and circuit stability applicability, which include circuit conduction mechanism research, pulse generation time improvement and recovery time reduction. By studying the avalanche transistor high-voltage transient conduction characteristics and reducing the loss in the carrier transport process, the influence of each parameter on the output is determined, and the key factors to enhance the circuit performance are identified. This paper designs a new high-repetition frequency ultrafast electric pulse generation (UPG) circuit using pure electronics components, which consists of combining avalanche transistor model 2N2222 with a hybrid Marx structure at the same time in the pulse circuit to add filtering, fast recovery diodes and pulse cutoff and other matching techniques to make its output more stable, which can obtain higher output frequency, faster rise-time and narrower pulse widths. It has been tested that a high re-frequency ultrafast high-voltage electrical pulse signal with a pulse repetition frequency of 200 kHz, a leading edge of 800 ps, a half-high pulse width of 5 ns, an amplitude of 1.2 kV and jitter of less than 5% can be generated at the load with a 50 Ω load at the output. The signal can be applied in the fields of ultrafast diagnosis, information countermeasures and nuclear electromagnetic radiation research.