Experimental acoustic modal analysis of a tenor saxophone

This paper presents an application of the Experimental Acoustic Modal Analysis (AMA) on a vintage 10 M Conn tenor saxophone. This technique originates from the traditional Modal Analysis which is commonly adopted to determine the dynamic behaviour of solid structures. The methodology is based on the measurement of Frequency Response Functions (FRFs) as a ratio of the acoustic pressure, measured by means of a set of microphones positioned along the saxophone body, and the volume velocity produced by an acoustic source and measured at the instrument input. The microphones are housed on the stripped saxophone keys by means of tailored three-dimensional printed adapters. The AMA makes use of the FRFs to extract modal parameters, such as resonance frequencies, loss factors, and mode shapes. These parameters pertain to the cavity modes of the saxophone passive resonator. The analysis has been performed for three different notes (B ♭, B, and C) and for two registers of the instrument in order to show the potential of the technique. Moreover, the influence of the mouthpiece volume on the cavity modes has been shown. The information obtained by AMA can find useful application in the validation of analytical or numerical models of this kind of musical instruments.