The Effect of Cathode Hydration, Temperature, and Porosity on AEM Electrolyzer Performance and Durability
作者
W. Henry Freer,Habin Park,Hazel J. Gerber,Paul A. Kohl
出处
期刊:Meeting abstracts [Institute of Physics] 日期:2025-07-11卷期号:MA2025-01 (38): 1948-1948
标识
DOI:10.1149/ma2025-01381948mtgabs
摘要
Hydrogen is a promising large-scale, long-term energy storage material which can be used as an alternative fuel to oil, gas, and coal. Water electrolysis with anion conducting polymer electrolytes has several advantages over conventional proton exchange membranes in terms of its material cost and scalability. The fabrication and operation of a durable, hydrogen evolving dry-cathode anion exchange membrane water electrolysis (AEMWE) cell is challenging because water is consumed at the cathode and water transport occurs only by diffusion through the AEM. It has been shown that dry-out at the cathode can cause AEM and/or ionomer degradation due the resulting high hydroxide concentration. In this study, the performance and durability of the hydrogen cathode was studied as a function of cathode hydration. The cathode hydration level affects the water mass transport, ionic conductivity, and electrode durability. The relative humidity (RH) at the cathode was controlled and the transport, activation energy and ohmic overpotentials of the cathode were measured in a three-electrode configuration, The RH was adjusted by using an external cathode feed gas with a set RH. The flowrate of the inlet gas and the RH value impact the cathode performance. The effect on durability at elevated temperatures will also be presented. Improvements from optimal inlet RH as well as the impact of over-hydration and under-hydration will be discussed.