材料科学
电容感应
电介质
电极
制作
复合材料
电容
压力传感器
传感器阵列
光电子学
电气工程
机械工程
计算机科学
工程类
机器学习
医学
病理
物理化学
化学
替代医学
作者
Ruiqing Li,Ke Dong,Mahyar Panahi‐Sarmad,Siming Li,Xueliang Xiao
标识
DOI:10.1021/acsaelm.1c00534
摘要
In this work, a facile three-dimensional (3D) printing of a one-piece flexible capacitive pressure sensor array is proposed with simple, economical, and scalable fabrication characteristics. The printed capacitive pressure sensor array is composed of continuous carbon fiber electrodes in the network and assembly of porous polyurethane dielectric. Also, the 3D printing way confers the fabrication with the advantage of time-saving by eliminating the assembly of electrodes and the dielectric layer. Salt microparticles were utilized as a kind of sacrificial material to embed micropores into the elastic dielectric layer of thermoplastic polyurethane, and a bundle of continuous carbon fibers extruded from the 3D printer nozzle was employed as the sensor electrodes. The formed one-point pressure sensor was constructed at the intersection by the cross-printing path of the upper and lower layers. The microporosity structure in the dielectric led to the sensor containing more compression amplitude, thus increasing the effective dielectric constant under pressure so that the sensor (5.15 N –1 ) with a 40% table salt content has a higher sensitivity than the unstructured sensor (0.32 N –1 ). Furthermore, the sensor exhibited a fast response/recovery time (60/80 ms), good stability (over 1000 cycles), and magnificent pressure resolution. Several one-point pressure sensors in the regular array were printed in one piece to be able to detect some distributed compression pressures. Thus, in the end, the sensor array was fixed to human joints such as fingers, knees, and elbows to collect limb motion signals and demonstrated potential application in the field of human motion detection.
科研通智能强力驱动
Strongly Powered by AbleSci AI