微型反应器
水溶液
膜
化学工程
水处理
化学
降级(电信)
饮用水净化
污染物
材料科学
催化作用
环境工程
有机化学
环境科学
计算机科学
生物化学
工程类
电信
作者
Juan Li,Yu Xia,Jingxing Li,Kaixiang Long,Fengjie Chen,Min Hua Feng,Shishang Guo,Bolei Chen
标识
DOI:10.1016/j.jwpe.2023.103521
摘要
Fenton AOPs in microreactors offer many significant advantages over the use of conventional reactors for water purification because they enable the more efficient generation of hydroxyl radicals. However, it is still challenging to apply the Fenton AOPs in microreactors for real applications due to their low water throughput and complex device design for H2O2 dosing. Here, we reported a porous aqueous thin membrane Fenton reactor supported by the Fe2O3 modified non-woven. H2O2 was generated by the contact electrification between water and non-woven, and further enhanced by the introduction of light irradiation and heat. The source water flowed through the non-woven, and thus removed the contained pollutants continuously at the water-solid interface. Additionally, the overall size of the device and its tilt angle were also discussed to optimize the membrane reactor purification ability, ensuring a significant treatment flux in the flow reactor while maximizing the pollutant degradation efficiency. 76 % of degradation efficiency and 4050 L/m3·h of throughput were achieved based on our porous aqueous membrane Fenton reactor. Our work may offer valuable insight for the future development of high-throughput aqueous membrane reactors for environmental purposes.
科研通智能强力驱动
Strongly Powered by AbleSci AI