压阻效应
材料科学
线性
可穿戴计算机
压力传感器
数码产品
可穿戴技术
柔性电子器件
光电子学
纳米技术
声学
计算机科学
电子工程
电气工程
机械工程
嵌入式系统
工程类
物理
作者
Joohyung Bang,Byungkwon Chun,Jaeyoung Lim,Yong‐Ha Han,Hongyun So
标识
DOI:10.1021/acsami.3c07554
摘要
Flexible pressure sensors have attracted significant attention owing to their broad applicability in wearable electronics and human–machine interfaces. However, it is still challenging to simultaneously achieve a broad sensing range and high linearity. Here, we present a reversed lattice structure (RLS) piezoresistive sensor obtained through a layer-level engineered additive infill structure via conventional fused deposition modeling three-dimensional (3D) printing. The optimized RLS piezoresistive sensor attained a pressure sensing range (0.03–1630 kPa) with high linearity (coefficient of determination, R 2 = 0.998) and sensitivity (1.26 kPa –1 ) due to the structurally enhanced compressibility and spontaneous transition of dominant sensing mechanism of the sensor. It also exhibited great mechanical/electrical durability and a rapid response/recovery time (170/70 ms). This remarkable performance enables the detection of various human motions over a broad spectrum, from pulse detection to human walking. Finally, a wearable electronic glove was developed to analyze the pressure distribution in various situations, thereby demonstrating its applicability in multipurpose wearable electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI