钒酸铋
光电流
分解水
材料科学
过硫酸盐
光催化
能量转换效率
光电子学
动力学
催化作用
化学工程
纳米技术
化学
工程类
物理
量子力学
生物化学
作者
Lina Wang,Zejun Liu,Xiaohong Xu,Yuefa Jia,Qiong Mei,Fei Ding,Jianhong Peng,Qizhao Wang
标识
DOI:10.1021/acsaem.2c00779
摘要
Bismuth vanadate (BiVO 4 ) with a narrow band gap was considered as one of the most desirable matrices for the photoelectrode in a photoelectrochemical (PEC) water splitting system. However, the serious recombination rate of photogenerated charges in BiVO 4 causes the practical PEC efficiency to be significantly lower than the theoretical value. Herein, we provide a simple route for modification of BiVO 4 -based photoanodes with Ni-NDAD to promote charge separation and accelerate water oxidation kinetics. As a result, the Ni-NDAD/BiVO 4 photoelectrodes deliver a high photocurrent density of 5.6 mA cm –2 (1.23 V vs reversible hydrogen electrode) and an incident photon-to-current conversion efficiency of 80% (460 nm), which were around 3.5- and 5.3-fold higher than that of pristine BiVO 4, respectively. In addition, the introduction of Ni-NDAD on BiVO 4 could trap photogenerated holes transferred from BiVO 4, thus allowing significant acceleration of water oxidation kinetics and overall improvement in the performance of the whole BiVO 4 -based PEC water splitting system. Furthermore, the Ni-NDAD/BiVO 4 photoanode also displayed high PEC catalytic activity for chlortetracycline (CTC) removal in the presence of persulfate (PS), achieving an 89.19% degradation efficiency within 30 min. This work provides a promising design strategy for efficient photogenerated charge separation to improve PEC water splitting and organic contaminant removal.
科研通智能强力驱动
Strongly Powered by AbleSci AI