A Compact Dual-Band Bandpass Filter Using Coupled Microstrip Lines

In this paper, a new compact dual-band bandpass filter (DB-BPF) is proposed using parallel coupled lines. The design method is based on introducing transmission zeros (TZs) in the frequency response of a single-wideband filter. In the proposed structure, three coupled lines and a multi-mode resonator are used to realize the wide bandpass filter. Meanwhile, two coupled lines that are connected at the end and loaded by an open-circuit stub are employed to make a new notch filter. The proposed DB-BPF is designed and fabricated on Rogers RO3210 substrate for Wireless Local Area Networks (WLANs) applications. The simulation results show good agreement with measurements. The measured results exhibit two passbands centered at 2.4 and 5.2 GHz, having an insertion loss of less than 0.1 dB and 0.9 dB, respectively. Low insertion loss, compact size, and high attenuation between two passbands are the main advantages of the proposed DB-BPF.