材料科学
墨水池
多孔性
柔性电子器件
数码产品
印刷电子产品
纳米技术
电容
基质(水族馆)
渗透(战争)
湿度
光电子学
复合材料
下降(电信)
耐久性
可穿戴技术
相对湿度
互连
多孔介质
空隙(复合材料)
喷墨打印
导电体
作者
Bheema Sankar Reddy,Chandantaru Dey Modak,Deepak Sharma,Rutvik Vasudev Lathia,Abhirami Santhosh,Saurabh Kumar,Navakanta Bhat,Prosenjit Sen
出处
期刊:Small
[Wiley]
日期:2026-02-02
卷期号:22 (21): e12003-e12003
标识
DOI:10.1002/smll.202512003
摘要
Porous substrates such as paper and fabric are foundational to the future of flexible electronics. Over 60% of flexible electronics applications, including wearable health monitors, environmental sensors, and e-textiles, rely on porous substrates due to their breathability, flexibility, and affordability. However, ink spreading, solvent penetration, and substrate swelling significantly challenge their large-scale fabrication. Here, we utilize Drop Impact Printing (DIP), a nozzle-free technique that reliably deposits highly concentrated inks (up to 70% mass loading) onto untreated porous substrates, preserving their intrinsic properties. DIP effectively reduces lateral ink spread and penetration by precisely ejecting microdroplets via a sieve-impact mechanism, enhancing particle retention, conductivity, and mechanical durability under bending. Microsupercapacitors and humidity sensors fabricated using DIP exhibit remarkable performance improvements. Specifically, the 70% mass-loaded microsupercapacitor shows approximately a 41-fold increase in areal capacitance compared to the 10% loading at high scan rates, while humidity sensors demonstrate nearly a 60% increase in maximum response when ink concentration rises from 10% to 55%. Furthermore, we demonstrate an integrated, self-powered humidity-sensing system, along with a wireless humidity-sensing setup fabricated entirely using DIP, underscoring its applicability to real-world flexible electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI