控制理论(社会学)
能量(信号处理)
钟摆
计算机科学
工程类
物理
声学
工作(物理)
振动
电磁场
功率(物理)
汽车工程
机械工程
控制工程
噪音(视频)
能源消耗
加速度
作者
Qitao Lu,Mingjing Cai,Xin Li,Junyi Cao,Wei‐Hsin Liao
出处
期刊:IEEE-ASME Transactions on Mechatronics
[Institute of Electrical and Electronics Engineers]
日期:2026-01-01
卷期号:: 1-11
被引量:1
标识
DOI:10.1109/tmech.2026.3681285
摘要
Pendulum electromagnetic energy harvesters (PEEHs) offer a promising solution for powering Internet of Things (IoT) devices by converting biomechanical energy during human walking into electrical power in the micro- to milliwatt range. While the previous studies have primarily focused on optimizing electromagnetic parameters, structural factors—such as gear ratio—have received comparatively little attention, despite their significant influence on energy conversion efficiency. In this article, a coupled electromechanical model is developed by integrating magnetic field analysis via the magnetic scalar potential method and dynamic modeling using the Euler–Lagrange formulation. Model-driven optimization is performed to guide the design of a high-performance PEEH prototype. The magnetic field computation is validated through finite element analysis in COMSOL, and the coupled model is validated experimentally. Under operating conditions of 1.2 Hz frequency, 30° amplitude, and a 60 Ω load, the device achieves a peak output power of 4.03 mW and a normalized power density of 11.79 W/(m3·Hz·°). This article provides practical design guidance for the development of efficient, compact energy harvesters for wearable and IoT applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI