True 3D building reconstruction: façade, roof and overhang modelling from oblique and vertical aerial imagery

Aerial imaging systems increasingly gain oblique viewing capabilities. Through these passive systems, photogrammetric 3D point clouds of a scene become available in addition to traditional vertical 2.5D information. In the field of urban reconstruction, this complementary information seeks for robust and automated fusion methods in order to derive 3D building geometry as well as topology in larger scales. It is sequentially shown how to get from façade planes over building footprints to roof reconstruction including overhangs. Façade planes are extracted from a photogrammetric high-resolution 3D point cloud. Local regression methods in 2D space are used to determine the local direction and a criterion for the local linearity of the point cloud. Based on these two parameters, the 3D point cloud is segmented according to which façade it belongs to. From the segmented point cloud, building footprints are extracted as polygons. Similar to cadaster information, those polygons, along with a traditional digital surface model (DSM), serve for one thing as the basis for overhang determination which is performed by fitting polynoms on the outside of façades and using their inflection points as overhang boundary. For another thing, they serve as roof areas which are segmented, topologically described and geometrically modelled. Again local regression methods are used but this time in 3D space in order to segment roof parts. Subsequently, the roof topology is derived using region growing methods. The final building models hold both, geometrical and topological properties.