扫描仪
计算机科学
工作流程
软件
逆向工程
牙科技师
计算机辅助设计
计算机辅助设计
工程制图
牙科
人工智能
工程类
医学
数据库
操作系统
程序设计语言
作者
Eneko Solaberrieta,O. Etxaniz,José Ramón Otegi,Aritza Brizuela-Velasco,Guillermo Pradíes
标识
DOI:10.1016/j.prosdent.2016.07.006
摘要
The virtual technique described in this article integrates reverse engineering and mandibular dynamics into dental computer-aided design and computer-aided manufacturing (CAD-CAM) systems. This technique aims to provide more objective information to the dental technician for the diagnosis, planning, and treatment phases. In order to carry out this protocol, the following devices, currently available in many practices, are necessary: an intraoral scanner, a T-Scan system, and some specific open reverse engineering software. By means of a virtual procedure, the T-Scan system detects the occlusal contacts, and the occlusal surfaces are obtained using an intraoral scanner. Once the alignment between the 3-dimensional occlusal surface and the T-Scan registration is carried out, the resulting contacts are projected onto the patient’s occlusal surfaces; in this way, occlusal forces are obtained over time. The results obtained with this procedure demonstrate the feasibility of integrating different tools and software and the full integration of this procedure into a dental digital workflow.
科研通智能强力驱动
Strongly Powered by AbleSci AI