材料科学
承载力
复合材料
复合数
结构工程
屈曲
压缩(物理)
管(容器)
横截面(物理)
叠加原理
承重
方位(导航)
极限荷载
有限元法
工程类
物理
地理
量子力学
地图学
作者
Yue Li,Yong Yan,Xue Meng,Kechao Zhang,Xiaorun Li,Chongming Gao
标识
DOI:10.3389/fmats.2022.858935
摘要
To provide references for the use of fabricated thin-walled cold-formed steel tubular lightweight concrete columns, the axial compression tests were conducted on single-limb and double-limb specimens. The results were compared with hollow specimens to analyze the effects of the cross-sectional size of the members, wall thickness, and steel ratio of the sections on the axial load-bearing capacity of the specimens. The test results show the following: 1) under the axial load, the typical damage of the specimens is local buckling of the steel tube and local crushing of the concrete. 2) The ultimate bearing capacity of the double-limb specimen is the highest. For the specimen with the sectional height-width ratio of 1.43, the ultimate bearing capacity of the double-limb specimen is 275.71% higher than that of the hollow steel tubular column and 241.49% that of single-limb specimens. 3) Based on the material superposition strength theory, the calculating method of the axial load-bearing capacity of thin-walled cold-formed steel tubular lightweight concrete columns was proposed and verified by comparing with the test results, which provides the design guidance for such members.
科研通智能强力驱动
Strongly Powered by AbleSci AI