微观结构
材料科学
热重分析
扫描电子显微镜
极限抗拉强度
拉曼光谱
碳化
傅里叶变换红外光谱
石墨
复合材料
电导率
无定形固体
分析化学(期刊)
化学工程
结晶学
化学
有机化学
物理
光学
物理化学
工程类
作者
Chun-Ling Liu,Wen‐Sheng Dong,Jing-Ren Song,Lang Liu
标识
DOI:10.1016/j.msea.2007.02.067
摘要
The microstructure evolution of phenolic fibers carbonized at different temperatures and the influence of the resulting microstructure on the mechanical and electrical behaviors were investigated using a combination of techniques including thermogravimetric analysis-mass spectroscopy (TG-MS), Fourier transform infrared spectroscopy (FT-IR), laser Raman spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), N2 physical adsorption, tensile strength and electrical conductivity measurements. The results showed that below 500 °C aromatic union was crosslinked by aliphatic bridges; above 500 °C with increasing temperature the polymer network was destroyed, hexagonal carbon layers were gradually formed; above 850 °C the content of the hexagonal carbon layers was further increased due to the transformation of the amorphous carbons in the fibers; above 1500 °C slow evolution toward ideal graphite was occurred. The accessible micropores (<1.2 nm, 200–1040 m2/g) could be detected in the range of 600–950 °C. The tensile strength of the carbon fibers exhibited a maximum value of 640 MPa at 550 °C. The electric conductivity increased with increasing temperature and reached a maximum value of 2.45 × 104 S/m at 2800 °C.
科研通智能强力驱动
Strongly Powered by AbleSci AI