膜
渗透汽化
硅氧烷
硅橡胶
材料科学
肿胀 的
接触角
硅酮
高分子化学
化学工程
扫描电子显微镜
傅里叶变换红外光谱
衰减全反射
复合材料
化学
聚合物
渗透
生物化学
工程类
作者
Xiaolong Han,Lei Wang,Jiding Li,Xia Zhan,Jian Chen,Jichu Yang
摘要
Abstract In this study, poly(dimethyl siloxane) (PDMS)/poly(vinylidene fluoride) (PVDF), poly(phenyl methyl siloxane) (PPMS)/PVDF, poly(ethoxy methyl siloxane) (PEOMS)/PVDF, and poly(trifluropropyl methyl siloxane) (PTFMS)/PVDF composite membranes were prepared. The different functional compositions of these membranes were characterized by Fourier transform infrared spectroscopy. The surfaces and sections of these membranes were investigated by scanning electron microscopy. The hydrophobicity at the membrane surface was assessed with contact angle measurement. Swelling experiments were carried out to investigate the swelling behavior of these membranes. The composite membranes prepared in this study were used in the pervaporation separation of ethanol/water mixtures, and their separation performances were compared. The results show that the separation performances of these membranes were strongly related to the silicone rubber components and composition, the total fluxes decreased in the following order: PDMS > PPMS > PEOMS > PTFMS. The separation factor followed the following order: PPMS > PEOMS > PDMS > PTFMS (5 wt % ethanol at 40°C). In addition, the effects of the feed temperature (40–70°C) and feed composition (5–20 wt %) on the separation efficiency were investigated experimentally. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011
科研通智能强力驱动
Strongly Powered by AbleSci AI