材料科学
钢包
冶金
材料选择
铸铁
复合材料
机械工程
工程类
标识
DOI:10.2478/amm-2013-0068
摘要
Abstract Industrial conditions of obtaining thick-walled and shaped castings intended for operations at temperatures: minus 40÷60°C are presented in the paper. The selection of a cast steel grade is based on known studies [1,10,14], however due to castings wall thickness (70-240mm), the way of preparing liquid metal (deep deoxidation and modification, argon stirring in a ladle) and conditions of filling mould cavities (gating system assuring quiet filling, directional solidification and avoiding a formation of inessential heat centres), were developed to assure the required impact strength. Maintaining these parameters as well as the selection of heat treatments for the produced massive castings allowed to achieve the impact strength over 50 J/cm 2 at minus 40°. This value was obtained for walls of various thickness
科研通智能强力驱动
Strongly Powered by AbleSci AI