合成气
甲烷
变压吸附
工作(物理)
工艺工程
吸附
化学
材料科学
环境科学
化学工程
催化作用
热力学
有机化学
物理
工程类
作者
Mariana C.N. Bessa,Azahara Luna‐Triguero,José Manuel Vicent‐Luna,Paulo Carmo,Mihalis N. Tsampas,Ana Mafalda Ribeiro,Alírio Egídio Rodrigues,Sofía Calero,Alexandre F. P. Ferreira
标识
DOI:10.1021/acs.iecr.3c00090
摘要
High Resolution Image Download MS PowerPoint Slide In this work, two industrial dual-step pressure swing adsorption (PSA) processes were designed and simulated to obtain high-purity methane, CO 2, and syngas from a gas effluent of a CO 2 electroreduction reactor using different design configurations. Among the set of zeolites that was investigated using Monte Carlo and molecular dynamics simulations, NaX and MFI were the ones selected. The dual-PSA process for case study 1 is only capable of achieving a 90.5% methane purity with a 95.2% recovery. As for case study 2, methane is obtained with a 97.5% purity and 95.3% recovery. Both case studies can produce CO 2 with high purity and recovery (>97 and 95%, respectively) and syngas with a H 2 /CO ratio above 4. Although case study 2 allows methane to be used as domestic gas, a much higher value for its energy consumption is observed compared to case study 1 (64.9 vs 29.8 W h mol CH4 –1 ).
科研通智能强力驱动
Strongly Powered by AbleSci AI