Preparation of Patterned Photonic Crystals with High Fastness and Iridescence Effect via Resist-Screen Printing

Patterned photonic crystals (PCs) have great application potential in the textile field owing to their attractive high-saturation iridescent effect. Herein, based on the idea of resist printing, a novel approach to constructing patterned photonic crystals via screen printing was designed and achieved. A colorless pattern with hydrophilic and hydrophobic difference was firstly prepared by screen printing using a hydrophilic polymer paste printed on a hydrophobic fabric, and then the PC structurally colored pattern was obtained through scrapping liquid photonic crystals (LPCs) on the fabric because the LPCs were spread and assembled in the hydrophilic pattern but resisted in the hydrophobic areas, so that to realize the rapid preparation of patterned PCs on the fabric surface. Once the contact angle difference (ΔCA) between the hydrophilic and hydrophobic areas exceeded 80, the "color paste" (that is, LPCs) did not stain the hydrophobic area at all after scrapping, and the assembled PCs pattern showed good contour sharpness and high-saturation iridescence effect. The complex multistructural color patterns on the fabrics were achieved by adjusting the size of nanospheres and using multistep printing and scrapping. The preparation of the protective layer on the PC surface effectively improved the structural stability of the patterned PCs while retaining the optical properties of the pattern. This patterned PCs preparation method was combined with a conventional responsive substance (rhodamine B) to obtain double anti-counterfeiting patterned PCs with the iridescence effect. The results suggested a promising future in both the highly efficient preparation of patterned PCs and the application of PCs in the anti-counterfeiting field.