Influence of Aqueous Phase Salt and Oil Phase Surfactants and Viscosity on the Dynamic Interfacial Tension and Coalescence Timescales

Liquid-liquid separation is a critically important process in the treatment of emulsions that can occur in our environment, such as oily stormwater, shipboard bilgewater, or off-shore oil spill treatment. Effective filtration systems, including coalescing filters, are essential for mitigating these environmental pollutants. Achieving this requires a comprehensive understanding of liquid-liquid interface dynamics influenced by additives and surfactants. Furthermore, understanding the impact of surfactants on emulsion stability in saline environments is vital for optimizing filtration processes and ensuring the protection of marine and freshwater ecosystems. In this work, these effects are highlighted using measurements performed across a range of droplet size, surfactant concentration, viscosity ratios, and saline presence. Dynamic IFT measurements are conducted using the pendant drop method for water in light mineral oil, with and without salt in the water phase. The effect of salt addition is also highlighted by using microfluidic coalescence experiments, in which it was found that the addition of salt increases the dimensionless drainage time below the critical micelle concentration. The second focus of this work is to study the effect of bulk phase viscosity on the stability. Dynamic IFT measurements are performed at both millimeter and micrometer scales using pendant drop experiments and microfluidic tensiometry, respectively, involving light and heavy mineral oils with varying SPAN80 surfactant concentrations. The surfactant diffusivity and interfacial adsorption and desorption rates are then extracted by fitting a surfactant diffusion and equation of state equations to the dynamic IFT measurements. The results of the IFT decay, surfactant diffusivity, and adsorption rates are compared at two different viscosity ratios. This study also compares the times required for IFT relaxation with the film drainage times in water-in-oil systems. The comparison aids in comprehending the impact of competing timescales during film drainage. The findings presented in this paper offer valuable insights into the design and optimization of liquid-liquid filtration systems, especially when operating under challenging environmental conditions, such as in saline environments. The principles explored here can be applied to improving industrial water treatment and in the design of advanced filtration technologies for chemical and petrochemical industries, particularly those involving flow, contributing to more sustainable and efficient practices in handling emulsified waste streams.