材料科学
移相模块
喷墨打印
硅
绝缘体上的硅
光电子学
液晶
绝缘体(电)
电压
相(物质)
纳米技术
复合材料
电气工程
墨水池
有机化学
插入损耗
工程类
化学
作者
Lukas Van Iseghem,Umar Khan,Ewout Picavet,Alain Yuji Takabayashi,Pierre Edinger,Peter Verheyen,Niels Quack,Kristinn B. Gylfason,Klaartje De Buysser,Jeroen Beeckman,Wim Bogaerts
标识
DOI:10.1002/adom.202500186
摘要
A new electro‐optic phase shifter device architecture consisting of two lateral rail electrodes in doped silicon close to a waveguide with a liquid crystal cladding is demonstrated. Starting with a completed silicon photonics wafer of IMEC's iSiPP50G platform (including modulators, detectors, and metallization), the back‐end‐of‐line stack is opened up locally down to the waveguides. Liquid crystal is deposited in the recesses using inkjet printing. The narrow gaps between the rail electrodes and the waveguide core allow for actuation with a low voltage, and increase the overlap with the actuated liquid crystal. The demonstrated device geometry has low carrier absorption losses even though the side‐rails are doped. This allows an increased driving frequency, eliminating phase flicker. A phase shift of 2 π for 2.7 V is obtained within 100 µm, going up to 6 π at 10 V with an insertion loss of 1 dB. Models suggest a power consumption <1 nW. The performance of this phase shifter is unmatched by alternative techniques that either require a higher voltage, have a larger optical loss or consume more electrical power. A novel purely digital driving scheme is demonstrated enabled by the unique device architecture, simplifying the required driver electronics.
科研通智能强力驱动
Strongly Powered by AbleSci AI