环境友好型
铋
环境化学
环境科学
离子
纳米技术
生化工程
化学
材料科学
工程类
冶金
有机化学
生态学
生物
作者
Ahmed H. ALANAZI,Amnah Salem Al Zbedy,Refat El‐Sayed,Khaled F. Debbabi,Alaa S. Amin
出处
期刊:
[Elsevier BV]
日期:2025-07-05
卷期号:53 (11): 100591-100591
被引量:1
标识
DOI:10.1016/j.cjac.2025.100591
摘要
ABSTRACT A highly responsive bulk optical sensor (optode) has been introduced for the detection of bismuth {Bi(III)}. This optode integrates sodium tetraphenylborate (NaTPB) and 2-(benzothiazolylazo)1,6-naphthalenediol (BTAND) into a plasticized polyvinyl chloride (PVC) membrane, incorporating o-nitrophenyl-octyl ether (o-NPOE) as a plasticizer. The influence of several variables was optimized, including pH, the solvent mediator base matrix, and the reagent concentration. The comparison of results with previously reported methods indicates that the proposed approach, characterized by its speed and simplicity, offers a low detection limit (2.25 ng/mL) and a favorable linear range (7.5–220 ng/mL). The sensor exhibited stability, remaining unchanged even after being stored for at least one month. The sensor was successfully regenerated using a 0.25 M nitric acid (HNO 3 ) solution, and it responded in a reversible manner with an RSD of less than 2.15% for six replicate measurements of 125 ng/mL of Bi(III) in different membranes. The capability to accurately and consistently monitor the quantity of Bi(III) ions in pharmaceutical and environmental samples with complex matrices is facilitated by the low detection limit and superior selectivity, despite the existence of interfering anions and cations.
科研通智能强力驱动
Strongly Powered by AbleSci AI