巴西橡胶树
道格拉斯冷杉
材料科学
高分子科学
复合材料
林业
植物
制浆造纸工业
园艺
工程类
天然橡胶
生物
地理
作者
Manjri Somal,Shailendra Kumar,Manoj Kumar Dubey,Deepak Kumar,Kamal Mishra
标识
DOI:10.1080/17480272.2025.2547841
摘要
The present study was carried out with the aim of comparing the effect of thermal modification environment: vacuum (dry) and steam (wet) on the weathering performance and a few physico-mechanical properties of rubberwood (Hevea brasiliensis) and Douglas fir (Pseudotsuga menziesii). Thermal modifications in dry (HTdry) and wet environment (HTwet) were carried at 160 °C and 180 °C for 3 hours. Thermal modification resulted in a significant improvement in dimensional stability and a reduction in hygroscopicity of the treated wood, with more improvement observed in HTwet. The wood color darkened as a consequence of thermal modification, with the maximum darkening occurring in wood treated at 180 °C in HTwet. The HTwet-treated wood was more resistant against short-term UV weathering (250 h) as evident from the results of color measurements and FTIR analysis. Modification of lignin under a wet environment led to enhanced UV resistance, making steam treatment a potential processing technique to enhance the weathering performance of wood. Thermal modification reduced the bending strength, with a significantly higher reduction in HTwet treated specimens compared to HTdry. The outcomes indicate that thermal modification in steam medium is more suitable for improving photostability; however, optimising process parameters is crucial to minimise mechanical strength loss.
科研通智能强力驱动
Strongly Powered by AbleSci AI