Numerical analysis on tractive performance of off-road tire on gravel road using a calibrated finite element method–discrete element method model and experimental validation

The interaction between off-road tires and granular terrain has a great influence on the tractive performance of off-road vehicles. However, the finite element method or the discrete element method cannot effectively study the interaction between off-road tires and granular terrain. The three-dimensional combined finite element and discrete element method is applied to handle this problem. In this study, a calibrated finite element method–discrete element method model is established, in which the finite element model of off-road tire is validated by stiffness tests, while the discrete element model of gravel particles is validated by triaxial compression tests. The calibrated finite element method–discrete element method model can describe the structural mechanics of the off-road tire and the macroscopic mechanical properties of the gravel road. Tractive performance simulations of the off-road tire on gravel road under different slip conditions are performed with the commercial software LS-DYNA. The simulation results are basically corresponded with the soil-bin test results in terms of granular terrain deformation and tractive performance parameters versus the slip rates. Finally, the effects of tread pattern, wheel load, and tire inflation pressure on tractive performance of off-road tire on granular terrain are investigated. It indicates that the calibrated finite element method–discrete element method can be an effective tool for studying the tire–granular terrain interaction and predicting the tractive performance of off-road tire on granular terrain.