超级电容器
石墨烯
材料科学
电极
粉煤灰
石墨烯泡沫
氧化物
拉曼光谱
化学气相沉积
循环伏安法
电容
复合材料
化学工程
氧化石墨烯纸
纳米技术
冶金
电化学
化学
光学
物理
工程类
物理化学
作者
Prengki Pransisco,Manjeet Singh,M. Shuaib,M.F. Shukur,Easter Joseph
标识
DOI:10.1002/mawe.201900249
摘要
Abstract The performance of supercapacitor energy storage is depending on the type of the material that is used as supercapacitor electrode. Graphene has been widely used as the base material for a lot of applications due to its remarkable properties. In this research, we try to combine 3D Graphene with waste material fly ash to be used as the electrode of supercapacitor. Fly ash is a residual material from burning pulverized coal in electric generation power plants which contain metal oxide materials such as iron oxide and aluminum oxide. This residual material might be usable as an electrode for supercapacitor due to its material contained. As the base material, the 3D graphene was successfully fabricated by using low pressure chemical vapor deposition (LPCVD) method and afterwards the fly ash was coated on the top of 3D graphene. The chemical properties and surface structure of the electrode material was studied by using Raman spectroscopy and field emission scanning electron spectroscopy (FESEM). 3 electrode systems were used to analyze the cyclic voltammetry results. According to the results, they show that the highest specific capacitance of 3D graphene/fly ash (FA) was about 0.025 F/cm2 at the lowest scan rate of 5 mV/s and it is recommended to use as the supercapacitor electrode.
科研通智能强力驱动
Strongly Powered by AbleSci AI