碳酸乙烯酯
电解质
法拉第效率
电极
介电谱
石墨
涂层
材料科学
化学工程
碳酸二甲酯
电化学
碳酸丙烯酯
无机化学
化学
复合材料
催化作用
有机化学
工程类
物理化学
作者
Rajalakshmi Senthil Arumugam,Lin Ma,Jing Li,Xin Xia,Jens Paulsen,Jeff R. Dahn
摘要
Li[Ni 0.6 Mn 0.2 Co 0.2 ]O 2 (NMC622) is one of the most attractive positive electrode materials for Li-ion cells. Ultra high precision coulometry, impedance spectroscopy, gas evolution and long-term cycling were used to explore the combined impact of several electrolyte additives and an Al 2 O 3 surface coating on NMC622/graphite cells tested to 4.4 V at 40°C. An excellent correlation between the short-term coulombic efficiency measurements and the long-term cycling results was noted. An electrolyte containing 1 M LiPF 6 in ethylene carbonate: ethyl methyl carbonate (3:7 by weight) with additives 2 wt% prop-1-ene-1,3 sultone (PES) + 1 wt% methylene methane disulfonate (MMDS) + 1 wt% tris (trimethylsilyl) phosphite (TTSPi) (this electrolyte is called PES 211) was found to give the best performance in both coated and uncoated NMC622/graphite cells. The surface coating was found to improve coulombic efficiency, reduce impedance and improve capacity retention in all cases studied. However, uncoated NMC622/graphite cells with PES211 were found to perform better than coated NMC622/graphite cells which used any other electrolyte. The special synergy between Al 2 O 3 -coated NMC622 and PES211 needs to be understood so that even better coatings and electrolyte combinations can be developed.
科研通智能强力驱动
Strongly Powered by AbleSci AI