材料科学
纳米压痕
复合材料
无定形固体
缩进
薄膜
弹性模量
可塑性
变形(气象学)
陶瓷
接触力学
剪切模量
变形机理
纳米技术
结晶学
微观结构
热力学
物理
有限元法
化学
作者
Ahmad Nawaz,Weiguo Mao,Chunsheng Lu,Y.G. Shen
标识
DOI:10.1016/j.ceramint.2016.09.170
摘要
Controllable low-temperature (500 °C) deposition of amorphous a-SiC ceramic films on Si(100) was achieved using a pulsed dc-magnetron puttering system in a mixture of CH4/Ar. The nanoscale elastic-plastic response of the film upon contact loading was systematically characterized and analyzed by depth sensing nanoindentation technique using a Berkovich tip indenter. The mean values for elastic modulus and hardness were found to be 170±10 and 11.0±0.8 GPa, respectively. The onset of elastic-plastic transition occurred with contact loading of 70 µN at a depth of 10 nm. By coupling the Hertzian contact theory and Johnson's cavity model, the critical shear stress (7.7 GPa), yielding strength (14.4 GPa), plastic zone size (30–300 nm), and plastic work ratio (0.18–0.40) of a-SiC thin film under nanoindentation were determined. Based on the experimental results, the resolved shear stress analysis and deformation behavior were found to be consistent with the interpretation that the deformation behavior was associated with local readjustment of small clusters of atoms. The deformation mechanism was also explained on the basis of shear transformation zones (STZs) amorphous plasticity theory.
科研通智能强力驱动
Strongly Powered by AbleSci AI