材料科学
聚合
电解质
化学工程
聚合物
离子电导率
单体
锂(药物)
阳极
制作
电化学
沉淀聚合
电导率
离子键合
高分子化学
极化(电化学)
离子液体
储能
自由基聚合
无机化学
电极
金属
化学稳定性
金属锂
相间
作者
Ping Liu,Zhong Qiu,Shenghui Shen,Tianqi Yang,Fengxiang Chen,Feng Cao,Xinqi Liang,Yongqi Zhang,Yongqi Zhang,Xueqi Du,Jiachen Ma,Rongrong Li,Jiayuan Xiang,Fangfang Tu,Yuanyuan Jiang,Yuhong Zhang,Jun Zhang,Ming Song,Jun Zhang,Yang Xia
标识
DOI:10.1021/acsami.5c16587
摘要
The polymerization methodologies hold critical importance in fabricating high-quality gel polymer electrolytes (GPEs) for solid-state batteries. This work introduces a plasma-activated instantaneous polymerization strategy for the synthesis of initiator-free poly(ethylene glycol) diacrylate (PEGDA)-based GPEs within seconds. The N radicals produced by N 2 plasma can efficiently initiate the polymerization of PEGDA monomers without requiring chemical initiators. Notably, the plasma-derived GPEs (N-GPEs) exhibit superior ionic conductivity (0.69 × 10 –3 S cm –1 ) compared to thermally polymerized counterparts (0.42 × 10 –3 S cm –1 ), due to the formation of optimized ion-conduction pathways. Remarkably, this initiator-free synthetic protocol demonstrates dual interfacial advantages, not only on suppression of initiator-induced side reactions at lithium metal anodes but also formation of a Li 3 N-enriched solid electrolyte interphase (SEI) through reactive nitrogen species, collectively enhancing the interfacial stability and ion transport kinetics. Electrochemical evaluations demonstrate that symmetric Li||Li cells with N-GPEs show stable cycling over 1600 h with minimal polarization (21 mV at 0.1 mA cm –2 ). When integrated into Li||LiFePO 4 full cells, the system achieves 96.3% capacity retention after 200 cycles at 0.5 C, which is much better than the counterpart. This plasma-enabled polymerization technology establishes a paradigm shift in fabrication of polymer electrolyte, offering a rapid and energy-efficient route to high-performance GPEs for energy storage.
科研通智能强力驱动
Strongly Powered by AbleSci AI