加氢脱氧
原材料
植物油精炼
催化作用
柴油
化学
焦炭
催化重整
制浆造纸工业
氢
碳氢化合物
选择性
可再生能源
大豆油
重新使用
析因实验
残余油
可再生燃料
化学工程
废物管理
开裂
加氢脱硫
燃料油
间歇式反应器
可再生资源
有机化学
中心组合设计
产量(工程)
制氢
环境科学
生物柴油
蒸馏
作者
Luanne Ester Monteiro Ferreira,Vinicius Rossa,Sancler C. Vasconcelos,Carolina Vieira Viêgas,Gisel Chenard Díaz,Winny Rêgo Cardoso,Thiago M. Lima,Yordanka Reyes Cruz,Donato Alexandre Gomes Aranda
出处
期刊:ACS omega
[American Chemical Society]
日期:2026-08-13
卷期号:11 (33): 50112-50134
标识
DOI:10.1021/acsomega.6c05430
摘要
Renewable hydrocarbons were produced from soybean oil (SO) and frying oil (FO) through hydrotreatment over a commercial NiMoS2/Al2O3 catalyst. The effects of temperature (350, 360, and 370 °C), hydrogen pressure (50, 60, and 70 bar), and stirring speed (500, 650, and 800 rpm) were investigated through a 23 factorial design in a batch reactor operated for 5 h with 3 wt % catalyst loading. High catalytic activity was observed for both feedstocks, with XTG (triacylglyceride conversions) above 98% under most experimental conditions. The optimum condition (370 °C, 70 bar, and 800 rpm) resulted in hydrocarbon selectivity (SHC) above 97% and selectivity toward the green diesel range (C16–C22 n-paraffins) (SGD) reached 95.12%. Statistical analysis identified temperature as the most significant influential variable, followed by hydrogen pressure, whereas stirring speed showed no significant effect. The fitted models exhibited high predictive capability (R2 > 0.96). Catalyst reuse tests maintained conversions above 93%, although a gradual loss of activity possibly associated with coke formation was observed. The results demonstrate that commercial NiMoS2/Al2O3 catalysts are effective for converting both refined and residual oils into SGD, highlighting the potential of frying oil as a low-cost feedstock for sustainable fuel production.
科研通智能强力驱动
Strongly Powered by AbleSci AI