表面张力
超临界流体
纳米流体
提高采收率
纳米颗粒
响应面法
流离失所(心理学)
中心组合设计
粒子(生态学)
毛细管作用
基础油
胶体
毛细管压力
复合数
化学工程
色散(光学)
复合材料
材料科学
混溶性
张力(地质)
热力学
粒径
基础(拓扑)
变形(气象学)
二次方程
压力(语言学)
机械
色谱法
毛细管数
纳米-
肺表面活性物质
还原(数学)
相(物质)
非线性系统
作者
Abdolreza Dabiri,Mohammad Afkhami Karaei
摘要
Interfacial tension (IFT) between supercritical CO2 (scCO2) and crude oil governs capillary trapping, mass transfer, and microscopic displacement efficiency, making it a key variable in CO2 enhanced oil recovery (CO2-EOR) and geological CO2 storage. This study systematically investigated how SiO2 nanoparticle concentration and particle size, two coupled formulation parameters, govern scCO2-crude oil IFT. Experiments were performed at 82.2 °C and 15.86 MPa using the pendant-drop method, while minimum miscibility pressure (MMP) was determined through slim-tube experiments. A central composite design combined with response surface methodology was used to evaluate the response over 0.125–1.0 wt. % concentration and 5–100 nm particle size. The base system exhibited an MMP of 25.51 MPa, whereas SiO2 nanofluids reduced MMP to 18.20–21.53 MPa. All MMP values exceeded the IFT measurement pressure, confirming sub-MMP measurement conditions. Across the design space, IFT ranged from 3.79 to 7.38 mN m−1. The quadratic model was highly significant (R2 = 0.9955 and p < 0.0001), accurately capturing the nonlinear combined response. Numerical optimization identified 0.73 wt. % SiO2 and 50 nm as the optimum, predicting an IFT of 3.58 mN m−1. Experimental validation yielded 3.41 ± 0.12 mN m−1, corresponding to a 72.83% reduction relative to the base value of 12.55 ± 0.25 mN m−1. The results indicate that IFT reduction reflects a size-dependent balance among interfacial accessibility, colloidal dispersion, and finite interfacial capacity. These findings provide a physically grounded basis for designing SiO2 nanofluids under reservoir-relevant pressure-temperature conditions while maintaining formulation variables for CO2-EOR and geological CO2 storage.
科研通智能强力驱动
Strongly Powered by AbleSci AI