磁铁
超导磁体
材料科学
超导电性
电磁线圈
机械工程
凝聚态物理
核工程
核磁共振
工程物理
电气工程
物理
工程类
作者
Uijong Bong,Kibum Choi,Jaemin Kim,Jeseok Bang,Jung Tae Lee,Chaemin Im,Jeonghwan Park,Jong‐Hoon Yoon,Geonyoung Kim,Hwanmo Ku,Wonkook Kang,Seungyong Hahn
摘要
In order to explore the applicability of superconducting magnets in a magnetic field range of 3 T or less, where superconducting magnets have not been much used so far, a prototype magnet development project has been launched in collaboration with Hanmi Techwin Corporation and Seoul National University. As a result of the project, here we report the design, construction, and operation results of a 2 T 240 mm defect-irrelevant winding (DIW) (RE) Ba2Cu3O7−x (REBCO) magnet. First, design goals were set considering its potential usage in industrial fields, and a 2 T 240 mm-bore multi-width no-insulation high-temperature superconductor magnet was designed accordingly. Based on the design, a total of 15 double pancake (DP) coils were wound, regardless of defects in REBCO tapes, and assembled together. After being installed in a conduction cooling system, the magnet was tested at a temperature of <20 K, and a magnetic field of 2 T at the magnet center was successfully generated with a total of four DP coils containing multiple defects. Based on the experimental results, the additional considerations required for the DIW approach at the magnet level are discussed.
科研通智能强力驱动
Strongly Powered by AbleSci AI