材料科学
钝化
多晶硅
退火(玻璃)
硅
兴奋剂
化学气相沉积
薄脆饼
光电子学
薄膜
纳米技术
化学工程
图层(电子)
复合材料
薄膜晶体管
工程类
作者
Jannatul Ferdous Mousumi,Geoffrey Gregory,Jeya Prakash Ganesan,Christián Núñez,Kenneth Provancha,Sven Seren,Heiko Zunft,Titel Jurca,Parag Banerjee,Aravinda Kar,Ranganathan Kumar,Kristopher Olan Davis
标识
DOI:10.1002/pssr.202100639
摘要
Herein, we investigate the process–structure–properties relationships of in situ phosphorus (P)‐doped polycrystalline silicon (poly‐Si) films by atmospheric pressure chemical vapor deposition (APCVD) for fabricating poly‐Si passivating, electron selective contacts. This high‐throughput in‐line APCVD technique enables to achieve a low‐cost, simple manufacturing process for crystalline silicon (c‐Si) solar cells featuring poly‐Si passivating contact by excluding the need for vacuum/plasma environment, and additional post‐deposition doping steps. A thin layer of this P‐doped poly‐Si is deposited on an ultrathin (1.5 nm) silicon oxide (SiOx) coated c‐Si substrate to fabricate the passivating contact. This is followed by various post‐deposition treatments, including a high‐temperature annealing step and hydrogenation process. The poly‐Si films are characterized to achieve a better understanding of the impacts of deposition process conditions and post‐deposition treatments on the microstructure, electrical conductivity, passivation quality, and carrier selectivity of the contacts which assists to identify the optimal process conditions. In this work, the optimized annealing process with post‐hydrogenation yields passivating contact with a saturation current density (J0) of 3 fA cm−2and an implied open‐circuit voltage (iVOC) of 712 mV on planar c‐Si wafer. Junction resistivity values ranging from 50 to 260 mΩ cm2are realized for the poly‐Si contacts processed in the optimal annealing condition.
科研通智能强力驱动
Strongly Powered by AbleSci AI