温度循环
光伏系统
可靠性(半导体)
动力循环
焊接
可靠性工程
晶体硅
材料科学
降级(电信)
耐久性
汽车工程
热的
计算机科学
太阳能电池
电子工程
功率(物理)
光电子学
复合材料
电气工程
工程类
气象学
物理
量子力学
作者
Shinji Kawai,Tadanori Tanahashi,Yutaka Fukumoto,Fujio Tamai,Atsushi Masuda,Michio Kondo
标识
DOI:10.1109/jphotov.2017.2741102
摘要
To assess the contribution of the thermomechanical stress on the long-term reliability of photovoltaic (PV) modules, we applied extended thermal cycling tests up to 600 cycles to 13 models of commercially available PV modules. The extensive testing, using 5-10 PV modules for each model, revealed that the levels of power loss, induced by thermal fatigue during this extended testing, differed in each model of the PV module. Degradations by solder bond failure and bypass diode failure, which were observed in a few models of PV modules, were most likely to result from incorrect soldering that may be completely avoidable through appropriate implementation of a quality management system. Therefore, we suggest that, in most of the latest PV modules, their durability to thermal fatigue was established, as evidenced by the extended thermal cycling test with 600 cycles. However, solder bond failure due to inappropriate manufacturing process quality, which is not identifiable by the conventional thermal cycling test (200 cycles), would be detected by this extended test in a few models. Based on these suggestions, we discuss the evaluation procedures of these failures caused by the quality-control and design issues of PV modules.
科研通智能强力驱动
Strongly Powered by AbleSci AI