Multicomponent electrocatalyst with ultralow Pt loading and high hydrogen evolution activity

Platinum is the most effective electrocatalyst for the hydrogen evolution reaction in acidic solutions, but its high cost limits its wide application. Therefore, it is desirable to design catalysts that only require minimal amounts of Pt to function, but that are still highly active. Here we report hydrogen production in acidic water using a multicomponent catalyst with an ultralow Pt loading (1.4 μg per electrode area (cm2)) supported on melamine-derived graphitic tubes (GTs) that encapsulate a FeCo alloy and have Cu deposited on the inside tube walls. With a 1/80th Pt loading of a commercial 20% Pt/C catalyst, in 0.5 M H2SO4 the catalyst achieves a current density of 10 mA cm−2 at an overpotential of 18 mV, and shows a turnover frequency of 7.22 s−1 (96 times higher than that of the Pt/C catalyst) and long-term durability (10,000 cycles). We propose that a synergistic effect between the Pt clusters and single Pt atoms embedded in the GTs enhances the catalytic activity. Although Pt is highly active for electrocatalytic production of H2 from water, its cost limits its wide application. Here, the authors prepare a high-performing catalyst that is supported on graphitic tubes, containing Fe, Co and Cu, and requires only a small amount of Pt.