润湿
穿孔
材料科学
水运
计算机模拟
扩散
传质
频道(广播)
流量(数学)
机械
复合材料
质子交换膜燃料电池
多相流
水流
两相流
液态水
水模型
输运现象
燃料电池
图层(电子)
微观结构
液体燃料
流体体积法
电导率
气体扩散
石油工程
环境科学
作者
Xuan Xie,Changwu Tang,Sheng Xu,Fei Dong,Bifeng Yin,Guirong Tan
标识
DOI:10.1177/09544070251390691
摘要
The optimization of the water management of the gas diffusion layer (GDL), the accurate control of its interface’s two-phase flow characteristics, the prevention of excessive liquid accumulation, and the enhancement of mass transfer efficiency are of crucial importance for the lifespan and performance of fuel cells. The study employs a numerical simulation method to investigate the impact of perforation on water transport characteristics inside the gas diffusion layer (GDL) in a fuel cell. Different perforation diameters, depths, spacing, and wetting properties were analyzed and compared with an unperforated GDL. Results show perforation significantly enhances liquid water distribution within the GDL and decreases local water saturation. A perforation diameter of D = 75 µm improves the GDL’s internal water transport performance. A fully penetrating perforation with a diameter of 200 microns has the strongest effect, which can almost eliminate the liquid water in the GDL except for that in the perforation. A spacing of L = 225 µm significantly improves the GDL’s liquid water distribution, resulting in more uniformity. The study of wettability around perforations revealed a hydrophilic area further reduces local water saturation. These findings are important for optimizing fuel cell design and provide theoretical guidance for design and optimization. Future studies can focus on optimizing perforation shape and size to improve fuel cell efficiency, stability, and reliability.
科研通智能强力驱动
Strongly Powered by AbleSci AI