Effects of Rock Water with Different Alkalinity and Pre-Oxidation on Re-Ignition Characteristics of Residual Coal

To investigate the impact of alkaline rock water (pH = 8, 9) combined with pre-oxidation on changes in pore structure and functional groups of residual coal in goaf, and consequently, on the secondary oxidation and spontaneous combustion characteristics of coal samples, an analysis was conducted. This analysis focused on examining changes in pore morphology and functional group content of pre-oxidized coal (OI0) and water-immersed oxidized coal (OI) through experiments utilizing low-temperature nitrogen adsorption and in-situ diffuse reflectance infrared spectroscopy. Secondary oxidation and spontaneous combustion characteristics of coal samples were analyzed using thermogravimetric differential thermal analysis incorporating oxidation kinetic theory. The findings indicated that after the combined effect of pre-oxidation and alkali leaching, the mesopore volume of the coal decreased, pore complexity increased, oxygen storage capacity was enhanced, and the apparent activation energy of the coal samples was significantly reduced. This reduction in activation energy was pronounced at lower temperatures but less so at higher temperatures. Specifically, the methyl and methylene contents of OI9 were significantly higher than those of other coal samples within the temperature range of 80–160°C. Meanwhile, the heat release of the low-temperature oxidation stages of OI0, OI8, and OI9 increased by 70.82%, 190.25%, and 75.05%, respectively, compared with RC. The study indicates an elevated risk of spontaneous coal combustion following the combined treatment of alkaline leaching and pre-oxidation. This research elucidates the mechanism of spontaneous combustion of water-immersed coal by alkaline rock water and pre-oxidation, providing valuable insights for the control of coal fires in alkaline mine-water environments.