材料科学
氮化碳
氮化物
介孔材料
化学工程
多孔性
无定形固体
三聚氰胺
缩聚物
碳纤维
无定形碳
钙钛矿(结构)
烧结
热处理
模板
氟化物
检出限
电化学
无机化学
催化作用
纳米技术
冷凝
金属
石墨氮化碳
聚酰亚胺
模板方法模式
过滤(数学)
聚合物
多孔介质
热的
表征(材料科学)
作者
Kazuya Kozumi,Yusuke Asakura,Yusuke Yamauchi
出处
期刊:Small
[Wiley]
日期:2026-06-19
卷期号:22 (45): e74242-e74242
摘要
ABSTRACT Here, we report a synthetic strategy for meso‐ or macroporous carbon nitride (C 3 N 4 ) using perovskite‐type metal fluorides (K M F 3 , M = Co, Ni) as hard templates. The synthesis involves a two‐step thermal treatment. An initial low‐temperature polycondensation of melamine generates polymeric intermediates that stabilize the template/precursor composites, thereby suppressing aggregation and/or sintering of K M F 3 during the subsequent high‐temperature treatment. The subsequent high‐temperature treatment then induces further condensation into C 3 N 4 while retaining the template‐defined structures. After removal of the templates, meso‐ or macroporous C 3 N 4 are successfully obtained, demonstrating that K M F 3 can serve as effective templates even under high‐temperature polycondensation conditions through appropriate reaction stage control. As a representative demonstration of functionality, electrochemical glucose sensing was used to evaluate the porous materials. The mesoporous KNiF 3 ‐templated sample (Mel‐KNiF 3 ) shows higher sensitivity and a lower detection limit than bulk C 3 N 4 and the macroporous KCoF 3 ‐templated sample (Mel‐KCoF 3 ), suggesting an important role of pore architecture in determining the accessibility of active sites. This study establishes a practical route to porous carbon nitride under thermal conditions and provides a simple strategy for structural control in high‐temperature polymeric systems.
科研通智能强力驱动
Strongly Powered by AbleSci AI