吸附
膜
渗透
水蒸气
热扩散率
朗缪尔
化学工程
化学
吸附
磁导率
高分子化学
材料科学
分析化学(期刊)
色谱法
热力学
有机化学
生物化学
物理
工程类
作者
Colin A. Scholes,Jianyong Jin,Geoffrey W. Stevens,Sandra E. Kentish
摘要
ABSTRACT Highly permeable glassy polymeric membranes based on poly (1‐trimethylsilyl‐1‐propyne) (PTMSP) and a polymer of intrinsic porosity (PIM‐1) were investigated for water sorption, water permeability and the separation of CO 2 from N 2 under humid mixed gas conditions. The water sorption isotherms for both materials followed behavior indicative of multilayer adsorption within the microvoids, with PIM‐1 registering a significant water uptake at very high water activities. Analysis of the sorption isotherms using a modified dual sorption model which accounts for such multilayer effects gave Langmuir affinity constants more consistent with lighter gases than the use of the standard dual mode approach. The water permeability through PTMSP and PIM‐1 was comparable over the water activities studied, and could be successfully model ed through a dual mode sorption model with a concentration dependent diffusivity. The water permeability through both membranes as a function of temperature was also measured, and found to be at a minimum at 80 ° C for PTMSP and 70 °C for PIM‐1. This temperature dependence is a function of reducing water solubility in both membranes with increasing temperature countered by increasing water diffusivity. The CO 2 ‐ N 2 mixed gas permeabilities through PTMSP and PIM‐1 were also measured and model ed through dual mode sorption theory. Introducing water vapour further reduced both the CO 2 and N 2 permeabilities. The plasticization potential of water in PTMSP was determined and indicated water swelled the membrane increasing CO 2 and N 2 diffusivity, while for PIM‐1 a negative potential implied that water filling of the microvoids hampered CO 2 and N 2 diffusion through the membrane. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53 , 719–728
科研通智能强力驱动
Strongly Powered by AbleSci AI