活性炭
朗缪尔吸附模型
化学工程
比表面积
核化学
吸附
碳纤维
解吸
打赌理论
碳化
介孔二氧化硅
作者
Youqun Wang,Zhi-bin Zhang,Yun-hai Liu,Xiao-hong Cao,Yating Liu,Qin Li
标识
DOI:10.1016/j.cej.2012.05.112
摘要
Abstract The mesoporous carbons (CMK-3) were functionalized with carboxyl group using sulfuric acid solution of ammonium persulfate (APS). The oxidized product (CMK-3-COOH) and CMK-3 were characterized by the small angle XRD, N 2 adsorption–desorption and FT-IR, and the results indicated the mesoporous and ordered structure of products did not change obviously after oxidation. The adsorption capacities for U(VI) from aqueous solution of CMK-3-COOH and CMK-3 were compared. The essential factors affected U(VI) adsorption such as initial pH, contact time and initial U(VI) concentration were investigated. In addition, the adsorption isotherm, kinetics and thermodynamics were investigated. The adsorption of U(VI) could be well-described by Langmuir, Freundlich isotherms and pseudo-second kinetic models. The monolayer adsorption maximum capacity of CMK-3-COOH and CMK-3 at 25 °C were 250.0 mg g −1 and 178.6 mg g −1 , respectively, which indicate the adsorption capacity was improved by oxidation. The thermodynamic parameters (Δ H , Δ S and Δ G ) showed the U(VI) adsorption on CMK-3-COOH and CMK-3 were all endothermic and spontaneous nature, respectively. Selective adsorption studies show that the CMK-3-COOH can selectively remove of U(VI), and the selectivity coefficients of mesoporous carbon were improved after oxidation in the presence of co-existing ions, Na(I), Ni(II), Sr(II), Mn(II), Mg(II) and Zn(II).
科研通智能强力驱动
Strongly Powered by AbleSci AI