阴极
电化学
涂层
材料科学
锂(药物)
表面改性
快离子导体
离子
电压
化学工程
锂离子电池
电解质
降级(电信)
分析化学(期刊)
复合材料
电极
阳极
工程物理
作者
Zaowen Zhao,Liu Yun,Bi Luo,Jixue Shen,Chunhui Wang,Jiafeng Zhang,Lei Cheng,Zhiming Xiao,Lei Ming,Bao Zhang,Xing Ou
标识
DOI:10.1016/j.apsusc.2021.151017
摘要
• A facile surface modification for Ni-rich layered cathode materials is proposed. • A NASICON-type Li 2 AlZr(PO 4 ) 3 is used as the coating layer. • Lithium residues on the surface of NCM material are removed by this modification. • The cycling stability and rate capability are significantly improved. Ni-rich layered oxides are considered as a promising commercial cathode material due to high energy density and low cost. However, the severe capacity degradation and poor rate capability caused by structural collapse during long cycles limit their practical application. Herein, a NASICON-structured Li 2 AlZr(PO 4 ) 3 is constructed on the surface of LiNi 0.92 Co 0.05 Mn 0.03 O 2 for stabilizing the layered structure. In addition, the construction process consumes the lithium residues on the surface of the material particles, thus reducing alkalinity of the material surface. Meanwhile, the electrochemical properties of the samples are studied. The capacity of the 1 wt% Li 2 AlZr(PO 4 ) 3 coated sample shows 144.2 mAh g −1 with a discharge middle voltage of 3.71 V after 400 cycles under the voltage range of 2.7–4.3 V. Further studies confirm that the uniform NASICON coating can effectively alleviate the structural degradation and intergranular cracks after long-term cycling. The research results illustrate the feasibility of the practical application of the modification strategy, which can be popularized in Ni-rich layered cathode materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI