Superhydrophobic surfaces are solid surfaces whose contact angle θ with water is higher than 150°and roll-off angle α is lower than 2°.And the superhydrophobic phenomena could be explained by two typical thoeries: Wenzel model and Cassie model.Besides θ and α,there are other important parameters to characterize the superhydrophobic surface,such as the contact angle hysteresis Δθ,the critical radius R_c of the drop rolling off the incline,the critical pressure Δp under which Cassie state would translate to Wenzel state,and the threshold velocity V_c below which an impacting drop sticks.Based on the two important conditions for the superhydrophobic surface: the rough microstructure of the surface and the lower surface free energy,two methods are introduced in this paper to produce the superhydrophobic surface: one is to create a rough microstructure on a hydrophobic surface,and the other is to modify a rough surface with lower surface free energy materials.In addition,some questions requiring further attention in the future are also presented in the same paper.