材料科学
光电子学
导电体
氧化物
响应时间
纳米技术
扩散
纳米线
金属
信号(编程语言)
复合数
电导率
聚合物
导电聚合物
工作(物理)
宽禁带半导体
氨
电阻率和电导率
工作温度
电流(流体)
电阻和电导
气体扩散
载流子
电极
高电阻
温度测量
电压
制作
电荷(物理)
作者
Siyuan Gao,Kuibo Lan,Zhehang Wang,Ce Yang,Ruibing Chen,Mao Ye,Guoxuan Qin
摘要
Reliable detection of low concentrations of NH3 at room temperature remains challenging. Traditional metal oxide sensors usually rely on relatively high operating temperatures, while conductive polymer sensors often suffer from insufficient stability and limited signal amplification at extremely low concentrations. In this work, a silicon-based NH3 sensor with a WO3–polyaniline (PANI)/silicon nanowire arrays (SiNW) composite structure was constructed. In this structure, WO3 and PANI form n–p heterointerfaces, while the SiNW array provides a three-dimensional scaffold that facilitates gas diffusion and supports charge transport within the sensing layer. Owing to the coupled effects of the WO3–PANI heterointerface and the SiNW-supported sensing architecture, the device exhibits a distinct resistance response to NH3 at room temperature. The obtained sensor shows good selectivity, repeatability, and stability, with a detectable NH3 concentration as low as 0.1 ppb under the present testing conditions. Compared with the PANI/SiNW reference device, the WO3–PANI/SiNW sensor exhibits a stronger response and improved detection capability in the low-concentration range. The enhanced sensing performance is mainly attributed to the synergistic effects of PANI deprotonation, WO3–PANI interfacial barrier modulation, and SiNW-assisted gas diffusion and charge transport. This work provides a feasible strategy for designing low-power, highly sensitive ammonia gas sensors based on interface-modulated polymer/oxide heterostructures.
科研通智能强力驱动
Strongly Powered by AbleSci AI