Effect of Natural Inhibitors on the Corrosion Properties of Grade 2 Titanium Alloy

This study investigates the effects of natural inhibitors (pomegranate, algae, and tomato extracts) on the corrosion resistance of titanium (grade 2). To deepen understanding the inhibition mechanism, Molecular Dynamic (MD) and Monte Carlo (MC) simulations were employed to analyze adsorption behaviors and identify optimal adsorption sites on titanium oxide (TiO2) surfaces for compounds within the inhibitors. Results indicate non-flat adsorption orientations, with pomegranate peel extract components showing superior inhibition capabilities, attributed to the formation of strong O-H chemical bonds with the TiO2 surface. In the experimental part of the study Electrochemical Impedance Spectroscopy (EIS) and Potentiodynamic Polarization (PDP) were conducted. Two electrolytes were tested: a solution 3.5% NaCl and a solution 0.5 M NaOH. All the tests were performed with 5% of inhibitor and with the reference solution. Also, inhibition efficiency was calculated on the base of PDP tests. The study found that pomegranate extract can act as a good corrosion inhibitor for titanium alloy in aqueous solutions 0.5 M NaOH. This was demonstrated by the increase in the corrosion potential and impedance modulus and decrease in the corrosion current density after the addition of pomegranate extract to the solution. However, in a 3.5% NaCl solution, the efficacy of pomegranate extract was less pronounced, probably due to the high aggressivity of the electrolyte. Tomato and algae extract have instead shown very low inhibition effects in all the tested conditions.